Keiba
Wish List (0)

  • Your shopping cart is empty!

categories

Keiba

Showing 1 to 35 of 35 (1 Pages)
Keiba C-C18 Cutter

Keiba C-C18 Cutter

Keiba C-C18 CutterFeatureCutting Capacity (phi mm) Hard Wire  : 2.9Nominal Dimension (mm)   : 200mmCutting Capacity (phi mm) Soft Wire   : 3.2..

Keiba HF-D04 Cutter

Keiba HF-D04 Cutter

HF-D04 KEIBASize (mm)   :  120Dimensions C (mm)   :   50Dimensions B (mm)   :   28.5Dimensions D (mm)   :   6Dimensions A (mm)   :   124 Weight (g)   :   55..

Keiba HK-D04 Cutter

Keiba HK-D04 Cutter

HK-D04 KEIBAfeatures-Small tools with large features. Material is authentic with trying vanadium special alloy steel marutolloy, It is a compact precision tools. Depending on the application, you can choose from the products...

Keiba HL-D14 Cutter

Keiba HL-D14 Cutter

HL-D14 KEIBAFeatures:  Size: 120 mmLength: 124 mmWidth: 50 mmThickness: 6 mmLength of nose: 28.5 mm Weight: 60 g..

Keiba HL-D24 Cutter

Keiba HL-D24 Cutter

HL-D24 KEIBASmall size, but with capacities same as regular size pliers. Marutolloy is used as material, and they are miniature precision tools of full capacity. A wide selection is provided to meet various applications.They fit in your hands very well and give you finest gripping feel.A convenie..

Keiba HN-D04 Cutter

Keiba HN-D04 Cutter

HN-D04 KEIBAFeatures: Cutting capacity: Iron wire diameter / 1.0mm. Copper wire / 1.2mmSpecialized in cutting electronic circuitsMade of stainless steelPlastic anti-slip plasticLength of the pliers: 108mmLength of nose pliers: 13.5mmBody width: 50mmThickness of pliers: 6mmSize: 4.5 " ..

Keiba HN-D14 Cutter

Keiba HN-D14 Cutter

HN-D14 KEIBAWhile the small tool-large features. Material is authentic by using the special alloy steel marutolloy with vanadium, small precision tools...

Keiba HR-D04 Cutter

Keiba HR-D04 Cutter

HR-D04 KEIBAfeatures-Small tools with large features. Material is authentic with trying vanadium special alloy steel marutolloy,It is a compact precision tools. Depending on the application, you can choose from the products. In-round processing of cotton materials...

Keiba HR-D14 Cutter

Keiba HR-D14 Cutter

HR-D14 KEIBAWhile small tools-large features. Material is authentic by using the special alloy steel marutolloy of vanadium, small precision tools...

Keiba HT-D04 Cutter

Keiba HT-D04 Cutter

HT-D04 KEIBAfeatures-Small tools with large features. Material is authentic with trying vanadium special alloy steel marutolloy,It is a compact precision tools. Depending on the application, you can choose from the products.In-cutting of cotton materials and plastics...

Keiba IN-274T Cutter

Keiba IN-274T Cutter

IN-274T KEIBAFeatures]-It is ergonomic to pursue a people-friendly light-weight high-performance type.-Provides excellent smoothness and prevent degradation due to compensating sharpness of high-precision joints Material -By using steel's original "marutolloy"...

Keiba LHF-D76 Cutter

Keiba LHF-D76 Cutter

LHF-D76 KEIBAHigh effectiveness demonstrate increasingly complex equipment and parts. Use the choose variety, to suit.-The spring on one side fixed structure: is single-sided fixed structure with spring (coil spring) corruption prevention and prevention of desorption. -Convenient narrow ta..

Keiba LHL-D76 Cutter

Keiba LHL-D76 Cutter

LHL-D76 KEIBAFeatures-Demonstrate effective in increasingly complex equipment and parts. Use the choose variety, to suit your requirements.-The spring on one side fixed structure: single-sided fixed structure considering the spring (coil spring) corruption prevention and prevention of desorption...

Keiba LHN-D76 Cutter

Keiba LHN-D76 Cutter

LHN-D76 KEIBAFeatures-Demonstrate effective in increasingly complex equipment and parts. Use the choose variety, to suit your requirements.-The spring on one side fixed structure: is single-sided fixed structure with spring coil （ spring ） corruption prevention and prevention of desorption. ..

Keiba LHT-D76 Cutter

Keiba LHT-D76 Cutter

LHT-D76 KEIBAFeatures -Is a special alloy steel body the mistreatment in the field, Advanced Micro pliers-coated special alumina (ceramic) earthing tools for insulation. Soft, promises success in the wide areas as precision tools copper wire can be cut severely...

Keiba LS-007 Cutter

Keiba LS-007 Cutter

LS-007 KEIBA3 mm of diameter aluminum wire to clean can be cut.Features:Overall length: 163mmTip length: 13mmHandle width: 48mmHead thickness: 7mm Tip angle: 15 degrees Weight: 60g..

Keiba M-616/B Cutter

Keiba M-616/B Cutter

M-616/B KEIBAFeatures -Is a special alloy steel body the mistreatment in the field, Advanced Micro pliers-coated special alumina (ceramic) earthing tools for insulation. Soft, promises success in the wide areas as precision tools copper wire can be cut severely...

Keiba MN-B05 Cutter

Keiba MN-B05 Cutter

MN-B05 KEIBAmicro nippers (thin type) 125 mm MN-B05features-Is a small Nipper was developed as a cutting tool in the field of electronics. In the copper （ 0.2-2.0 mm Ф ） General soft line （ 0.8 mm Ф ） until there is possible cutting range...

Keiba MNA-04 Cutter

Keiba MNA-04 Cutter

MNA-04 KEIBAProduct Size -4 inch (100mm) cutting ability - SoftWire1.4mm CoperWire0.2mm-1.6mm..

Keiba N-205 Cutter

Keiba N-205 Cutter

N-205 KEIBAIs a specialized tool for cutting wire. So you can cut both soft and hard line will pay attention to cutting edge...

Keiba PL-714 Cutter

Keiba PL-714 Cutter

PL-714 KEIBANippers for plastic (cutting edge shape: Standard)..

Keiba PL-715 Cutter

Keiba PL-715 Cutter

PL-715 KEIBANippers for plastic (cutting edge shape: Standard)..

Keiba PL-716 Cutter

Keiba PL-716 Cutter

PL-716 KEIBANippers for plastic (cutting edge shape: Standard)..

Keiba PL-717 Cutter

Keiba PL-717 Cutter

PL-717 KEIBANippers (cutting edge shape: standard)Cutting Capacity (mm) :  6.0 (ABS)..

Keiba PL-726 Cutter

Keiba PL-726 Cutter

PL-726 KEIBANippers (cutting edge shape: Flat) Cutting Capacity (mm) :  5.0 (ABS)..

Keiba PL-726/A Cutter

Keiba PL-726/A Cutter

PL-726/A KEIBANippers (edge shape: flat blade with adjustment screw) Cutting Capacity (mm)   :  5.0 (ABS)..

Keiba PL-736 Cutter

Keiba PL-736 Cutter

PL-736 KEIBAErgo Nipper (cutting edge shape / right - handed standard) Cutting Capacity (mm)  :   5.0 (ABS)..

Keiba PL-736/L Cutter

Keiba PL-736/L Cutter

PL-736L KEIBAErgo Nipper (cutting edge shape / right - handed standard) Cutting Capacity (mm)  :  5.0 (ABS)..

Keiba PL-756 Cutter

Keiba PL-756 Cutter

PL-756 KEIBANippers ( edge shape: flat type degrees / 45) Cutting Capacity (mm)  : 5.0 (ABS)..

Keiba PL-757 Cutter

Keiba PL-757 Cutter

PL-757 KEIBANippers ( edge shape: flat type degrees / 45) Cutting Capacity (mm)  :  5.0 (ABS)..

Keiba PL-766 Cutter

Keiba PL-766 Cutter

Keiba PL-766 CutterNippers Diagonal Cutters (cutting edge shape: standard type degree / 35) Cutting Capacity (mm)  : 5.0 (ABS)..

Keiba PL-796 Cutter

Keiba PL-796 Cutter

PL-796 KEIBANippers ( edge shape: flat type degrees / 90) Cutting Capacity (mm)  : 5.0 (ABS)..

Keiba PN-285 Cutter

Keiba PN-285 Cutter

PN-285 KEIBAfeaturesIt is the lightweight high-performance type that is kind to a person in pursuit of Ergonomic. A nipper for the exact work that it is easy to hold in Ergonomic design...

Keiba PU-266 Cutter

Keiba PU-266 Cutter

PU-266 KEIBAFeatureCutting Capacity (phi mm) Hard Wire  : 1.8Nominal Dimension (mm)   : 165Cutting Capacity (phi mm) Soft Wire   : 2.3 Weight (g)   : 160..

Keiba PU-276 Cutter

Keiba PU-276 Cutter

PU-276 KEIBASize (mm)   :  165Cutting Capacity (phi mm) Soft Wire : 2 Weight (g)  :   160..

Showing 1 to 35 of 35 (1 Pages)