CASTING

Refine Search


Showing 1 to 250 of 409 (2 Pages)

1.5 kg Wax Injector

1.5 kg Wax Injector Aluminium tank, with heating provided by a band type heating element running right round the outside, to guarantee a uniform temperature of wax inside. Setting and temperature control with digital thermostat. Injection valve with charge reserve, to allow jets of wax without in..

1/2 POUND BLOCK BLUE

1/2 POUND BLOCK BLUE This is a new blue Ferris File-a-wax 1/2 lb bar It is made for designing your own pendants, buckles, bracelets and other large jewelry models for lost wax casting This wax can be sawed, filed or carved to achieve the desired shapes and it can be handled without soften..

1/2 POUND BLOCK GREEN

1/2 POUND BLOCK GREEN This is a new GREEN Ferris 1/2 lb bar Hard Wax It is made for designing your own pendants, buckles, bracelets and other large jewelry models for lost wax casting This wax can be sawed, filed or carved to achieve the desired shapes and it can be handled without soften..

1/2 PURPLE FERRIS SLICE

1/2 PURPLE FERRIS SLICE This is a new PURPLE Ferris 1/2 lb bar Hard Wax It is made for designing your own pendants, buckles, bracelets and other large jewelry models for lost wax casting This wax can be sawed, filed or carved to achieve the desired shapes and it can be handled without sof..

100x100x25MM Single Mould Frame

100x100x25MM Single Mould Frame Aluminum plain mould sheets for Mould frame It will be used for rubber vulcanizing process with different types of sizes and number of frames...

100x100x30MM Single Mould Frame

100x100x30MM Single Mould Frame Aluminum plain mould sheets for Mould frame It will be used for rubber vulcanizing process with different types of sizes and number of frames...

100x100x50MM Single Mould Frame

100x100x50MM Single Mould Frame Aluminum plain mould sheets for Mould frame It will be used for rubber vulcanizing process with different types of sizes and number of frames...

100X80X40MM Single Mould Frame

100X80X40MM Single Mould Frame Aluminum Mould frame It will be used for rubber vulcanizing process with different types of sizes and number of frames...

100x90x30MM Single Mould Frame

100x90x30MM Single Mould Frame Aluminum plain mould sheets for Mould frame It will be used for rubber vulcanizing process with different types of sizes and number of frames...

100x90x50MM Single Mould Frame

100x90x50MM Single Mould Frame Aluminum plain mould sheets for Mould frame It will be used for rubber vulcanizing process with different types of sizes and number of frames...

110X150X40MM 2Division Mould Frame

110X150X40MM 2Division Mould Frame Aluminum plain mould sheets for Mould frame It will be used for rubber vulcanizing process with different types of sizes and number of frames...

110X90X15MM Single Mould Frame

110X90X15MM Single Mould Frame Aluminum Mould frame It will be used for rubber vulcanizing process with different types of sizes and number of frames...

110X90X25MM Single Mould Frame

110X90X25MM Single Mould Frame Aluminum Mould frame It will be used for rubber vulcanizing process with different types of sizes and number of frames...

110X90X30 Single Mould Frame

110X90X30 Single Mould Frame Aluminum Mould frame It will be used for rubber vulcanizing process with different types of sizes and number of frames...

110X90X40MM Single Mould Frame

110X90X40MM Single Mould Frame Aluminum plain mould sheets for Mould frame It will be used for rubber vulcanizing process with different types of sizes and number of frames...

120x100x30MM Single Mould Frame

120x100x30MM Single Mould Frame Aluminum plain mould sheets for Mould frame It will be used for rubber vulcanizing process with different types of sizes and number of frames...

120x100x50MM Single Mould Frame

120x100x50MM Single Mould Frame Aluminum plain mould sheets for Mould frame It will be used for rubber vulcanizing process with different types of sizes and number of frames...

150x110X15MM Single Mould Frame

150x110X15MM Single Mould Frame Aluminum plain mould sheets for Mould frame It will be used for rubber vulcanizing process with different types of sizes and number of frames...

150X110X25MM 2Division

150X110X25MM 2Division Mould Frame Aluminum Mould frame It will be used for rubber vulcanizing process with different types of sizes and number of frames...

150X110X30MM 2Division Mould Frame

150X110X30MM 2Division Mould Frame Aluminum plain mould sheets for Mould frame It will be used for rubber vulcanizing process with different types of sizes and number of frames...

155x110X20MM Single Mould Frame

155x110X20MM Single Mould Frame Aluminum plain mould sheets for Mould frame It will be used for rubber vulcanizing process with different types of sizes and number of frames...

160x110X13MM Single Mould Frame

160x110X13MM Single Mould Frame Aluminum plain mould sheets for Mould frame It will be used for rubber vulcanizing process with different types of sizes and number of frames...

180X120X10MM 4Division

180X120X10MM 4Division Mould Frame Aluminum Mould frame It will be used for rubber vulcanizing process with different types of sizes and number of frames...

180X150X20MM 3Division

180X150X20MM 3Division Mould Frame Aluminum Mould frame It will be used for rubber vulcanizing process with different types of sizes and number of frames...

183X50X32MM Single Hole

183X50X32MM Single Hole Mould Frame Aluminum Mould frame It will be used for rubber vulcanizing process with different types of sizes and number of frames...

190X110X20 Single Mould Frame

190X110X20 Single Mould Frame Aluminum Mould frame It will be used for rubber vulcanizing process with different types of sizes and number of frames...

198X50X28MM Three Hole

198X50X28MM Three Hole Mould Frame Aluminum Mould frame It will be used for rubber vulcanizing process with different types of sizes and number of frames...

2.5 kg Wax Injector

2.5 kg Wax InjectorThe cire perdue method for casting small items is widely used by goldsmiths, who need to produce wax models with perfectly uniform surfaces, with no porosity or air bubbles. In order to meet these needs, our wax injectors have been designed with advice from master goldsmiths, wi..

200X150X20MM 4Division

200X150X20MM 4Division Mould Frame Aluminum Mould frame It will be used for rubber vulcanizing process with different types of sizes and number of frames...

200X25X48MM Double Hole

200X25X48MM Double Hole Mould Frame Aluminum Mould frame It will be used for rubber vulcanizing process with different types of sizes and number of frames...

210X150X35MM 4Division

210X150X35MM 4Division Mould Frame..

240X50X30MM Single Hole

240X50X30MM Single Hole Mould Frame Aluminum Mould frame It will be used for rubber vulcanizing process with different types of sizes and number of frames...

3 Inch Graphite Gasket

3 Inch Graphite Gasket Graphite impregnated gaskets used to seal flask while vacuuming...

3 INCH RED RING GASKET

3 INCH RED RING GASKET Natural rubber gaskets/sealing rings ...

3 INCH RUBBER BASE

3 INCH RUBBER BASEUsed to place wax tree and base for POP..

3.5 Inch Black Graphite Gasket

3.5 Inch Black Graphite Gasket Graphite impregnated gaskets used to seal flask while vacuuming...

3.5 INCH RED RING GASKET

3.5 INCH RED RING GASKET Natural rubber gaskets/sealing rings ...

3.5 INCH RUBBER BASE

3.5 INCH RUBBER BASE Used to place wax tree and base for POP..

3.5x4.5INCH MOULD FRAME PLATE

3.5x4.5 INCH MOULD FRAME PLATE Aluminum plain mould sheets for Mould frame It will be used for rubber vulcanizing process with different types of sizes and number of frames...

4 Inch Black Graphite Gasket

4 Inch Black Graphite Gasket Graphite impregnated gaskets used to seal flask while vacuuming...

4 INCH RED RING GASKET

4 INCH RED RING GASKET Natural rubber gaskets/sealing rings ...

4 INCH RUBBER BASE

4 INCH RUBBER BASE Used to place wax tree and base for POP..

4.3 Inch Black Carbon Gasket

4.3Inch Black Carbon GasketGraphite impregnated gaskets used to seal flask while vacuuming...

4.5 Inch Black Graphite Gasket

4.5Inch Black Graphite Gasket Graphite impregnated gaskets used to seal flask while vacuuming...

4.5 INCH CARBON GASKET

4.5 INCH CARBON GASKET Graphite impregnated gaskets used to seal flask while vacuuming...

4.5 INCH RED RING GASKET

4.5 INCH RED RING GASKET Natural rubber gaskets/sealing rings ...

4.5 INCH Rubber Base

4.5 INCH Rubber Base Used to place wax tree and base for POP..

4.5X4.5 INCH MOULD FRAME PLATE

4.5X4.5 INCH MOULD FRAME PLATE Aluminum plain mould sheets for Mould frame It will be used for rubber vulcanizing process with different types of sizes and number of frames...

4.5x5.5 INCH MOULD FRAME PLATE

4.5x5.5 INCH MOULD FRAME PLATE Aluminum plain mould sheets for Mould frame It will be used for rubber vulcanizing process with different types of sizes and number of frames...

4.5x6.5 INCH MOULD FRAME PLATE

4.5x6.5 INCH STEEL PLATE FOR CASTING MOULD FRAME Aluminum plain mould sheets for Mould frame It will be used for rubber vulcanizing process with different types of sizes and number of frames...

5 Inch Black Carbon Gasket

5 Inch Black Carbon Gasket Graphite impregnated gaskets used to seal flask while vacuuming...

5 INCH CARBON GASKET

5 INCH CARBON GASKET Graphite impregnated gaskets used to seal flask while vacuuming...

5 Inch Graphite Gasket

5 Inch Graphite Gasket Graphite impregnated gaskets used to seal flask while vacuuming...

5 INCH RED RING GASKET

5 INCH RED RING GASKET Natural rubber gaskets/sealing rings ...

5 INCH RUBBER BASE

5 INCH RUBBER BASE Used to place wax tree and base for POP..

5.5 INCH CARBON GASKET

5.5 INCH CARBON GASKET Graphite impregnated gaskets used to seal flask while vacuuming...

5.5 INCH RED RING GASKET

5.5 INCH RED RING GASKET Natural rubber gaskets/sealing rings ...

6 INCH CARBON GASKET

6 INCH CARBON GASKET Graphite impregnated gaskets used to seal flask while vacuuming...

6X8 INCH MOULD FRAME PLATE

6X8 INCH MOULD FRAME PLATE Aluminum plain mould sheets for Mould frame It will be used for rubber vulcanizing process with different types of sizes and number of frames...

7 INCH CARBON GASKET

7 INCH CARBON GASKET Graphite impregnated gaskets used to seal flask while vacuuming...

72X46X21MM Single Mould Frame

72X46X21MM Single Mould Frame Aluminum plain mould sheets for Mould frame It will be used for rubber vulcanizing process with different types of sizes and number of frames...

72X47X12MM Double Mould Frame

72X47X12MM Double Mould Frame Aluminum plain mould sheets for Mould frame It will be used for rubber vulcanizing process with different types of sizes and number of frames...

72X47X16MM Single Mould Frame

72X47X16MM Single Mould Frame Aluminum plain mould sheets for Mould frame It will be used for rubber vulcanizing process with different types of sizes and number of frames...

72X47X18MM Double Mould Frame

72X47X18MM Double Mould Frame Aluminum plain mould sheets for Mould frame It will be used for rubber vulcanizing process with different types of sizes and number of frames...

72x47x20MM Four In One Mould Frame

72x47x20MM Four In One Mould Frame Aluminum plain mould sheets for Mould frame It will be used for rubber vulcanizing process with different types of sizes and number of frames...

72X47X22MM Three In one Mould Frame

72X47X22MM Three In one Mould Frame Aluminum plain mould sheets for Mould frame It will be used for rubber vulcanizing process with different types of sizes and number of frames...

72X47X25MM Double Mould Frame

72X47X25MM Double Mould Frame Aluminum plain mould sheets for Mould frame It will be used for rubber vulcanizing process with different types of sizes and number of frames...

72x47x25MM Four In One Mould Frame

72x47x25MM Four In One Mould Frame Aluminum plain mould sheets for Mould frame It will be used for rubber vulcanizing process with different types of sizes and number of frames...

72X47X30MM Double Mould Frame

72X47X30MM Double Mould Frame Aluminum plain mould sheets for Mould frame It will be used for rubber vulcanizing process with different types of sizes and number of frames...

72X47X31MM Single Mould Frame

72X47X31MM Single Mould Frame Aluminum plain mould sheets for Mould frame It will be used for rubber vulcanizing process with different types of sizes and number of frames...

72X47X32MM Single Mould Frame

72X47X32MM Single Mould Frame Aluminum plain mould sheets for Mould frame It will be used for rubber vulcanizing process with different types of sizes and number of frames...

72X47X37MM Four In One Mould Frame

72X47X37MM Four In One Mould Frame Aluminum plain mould sheets for Mould frame It will be used for rubber vulcanizing process with different types of sizes and number of frames...

72X47X38MM Double Mould Frame

72X47X38MM Double Mould Frame Aluminum plain mould sheets for Mould frame It will be used for rubber vulcanizing process with different types of sizes and number of frames...

72x47x40mm single mould frame

72x47x40mm single mould frame Aluminum plain mould sheets for Mould frame It will be used for rubber vulcanizing process with different types of sizes and number of frames...

72X47X47MM Three In One Mould Frame

72X47X47MM Three In One Mould Frame Aluminum plain mould sheets for Mould frame It will be used for rubber vulcanizing process with different types of sizes and number of frames...

80X80X25MM Single Mould Frame

80X80X25MM Single Mould Frame Aluminum plain mould sheets for Mould frame It will be used for rubber vulcanizing process with different types of sizes and number of frames...

80X80X50MM Single Mould Frame

80X80X50MM Single Mould Frame Aluminum plain mould sheets for Mould frame It will be used for rubber vulcanizing process with different types of sizes and number of frames...

90X110X20Mm Single Mould Frame

90X110X20Mm Single Mould Frame Aluminum Mould frame It will be used for rubber vulcanizing process with different types of sizes and number of frames...

90x90x25MM Single Mould Frame

90x90x25MM Single Mould Frame Aluminum plain mould sheets for Mould frame It will be used for rubber vulcanizing process with different types of sizes and number of frames...

90x90x50MM Single Mould Frame

90x90x50MM Single Mould Frame Aluminum plain mould sheets for Mould frame It will be used for rubber vulcanizing process with different types of sizes and number of frames...

Acrylic Liqua Cast Frame 70x150MM

Acrylic Adjustable Liqua Cast mould Frame 70x150MM Liquid/ Silicon rubber mould process , This silicon rubber mould will coming in two parts , part A-Hard, Part B-Soft silicon. Ratio 1:1 Work time 5 to 10 min. total mixing process. (3 to 5 min. mixing in the bowl & again 5 min. pou..

Acrylic Liqua Cast Frame 90x165MM

Acrylic Adjustable Liqua Cast Mould Frame 90x165MM Liquid/ Silicon rubber mould process , This silicon rubber mould will coming in two parts , part A-Hard, Part B-Soft silicon. Ratio 1:1 Work time 5 to 10 min. total mixing process. (3 to 5 min. mixing in the bowl & again 5 min. pou..

Acrylic Liqua Cast Frame 90x95MM

Acrylic Adjustable Liqua Cast Mould Frame 90x95MM Liquid/ Silicon rubber mould process , This silicon rubber mould will coming in two parts , part A-Hard, Part B-Soft silicon. Ratio 1:1 Work time 5 to 10 min. total mixing process. (3 to 5 min. mixing in the bowl & again 5 min. pour..

Acrylic Liqua Cast Frame110x120MM

Acrylic Adjustable Liqua Cast Mould Frame 110x120MM Liquid/ Silicon rubber mould process , This silicon rubber mould will coming in two parts , part A-Hard, Part B-Soft silicon. Ratio 1:1 Work time 5 to 10 min. total mixing process. (3 to 5 min. mixing in the bowl & again 5 min. po..

Acrylic Liqua Cast Frame135x110MM

Acrylic Adjustable Liqua Cast Mould Frame 135x110MM Liquid/ Silicon rubber mould process , This silicon rubber mould will coming in two parts , part A-Hard, Part B-Soft silicon. Ratio 1:1 Work time 5 to 10 min. total mixing process. (3 to 5 min. mixing in the bowl & again 5 min. po..

AIR FILTER GB-202 PRESSURE SENSOR

Air Filter GB-202 for Pressure Sensor MC, VC Series..

AIR FILTER VACUUM PUMP

Air Filter Vacuum Pumpair filter, vacuum pump / 21m³/h BUSCH pump C75..

Aqua Blue Flakes Wax-Kerr

Aqua Blue Flakes Wax - Kerr..

Aqua Flakes Torquise Blue-Kerr

Aqua Flakes Torquise Blue-Kerr..

AQUA GREEN FLAKES WAX-KERR

AQUA GREEN FLAKES WAX-KERR..

B-1062 SOLID GOLD FERRIS RING WAX

B-1062 SOLID GOLD FERRIS RING WAX Round Bar (B1062). Pre-formed gold toned wax bar. Slightly flexible wax with medium hardness designed to withstand considerable handling. Can be carved into fine detail and polished. Melts at approx. 240°F. 1 1/16″ Diameter. 6″ Length...

B-875 BLUE FERRIS RING WAX

B-875 BLUE FERRIS RING WAX Round Bar (B875). Pre-formed blue wax bar. May be either hand or machined shaped with files, burs or on a lathe. Blue wax is most flexible with regular hardness. Will bend 90° on 1/8″ thickness. 7/8″ Diameter. 6″ Length...

B-875 GREEN FERRIS RING WAX

B-875 GREEN FERRIS RING WAX These preformed tubes provide an intelligent approach when designing rings.  Ready to use in three grades of hardness that may be either hand or machine worked.  All ring tubes are 6″ long. Ferris Ring Tube B-875 Solid Green tube Hard ca..

Bailo Sand Blaster Machine S-06606

Bailo Sand Blaster Machine,S-06606 Machine for coarse and fine sandblasting, widia nozzle and a large internal tank, foot control Cm  32x39x44      Weight: 10kg..

Bailo Sand Blaster Machine S-06615

Bailo Sand Blaster Machine S-06615Sandblaster one, two E three and version. Preset for connection the Outside aspirator pedal control pressure regulator and pressure gauge for each cylinder Item   S.06615 Moduls N° 2 ..

Bailo Sand Blaster Machine S06602

Bailo Sand Blaster Machine S06602 “OrO” coarse sandblaster Economic, adapted to the removal of investment and oxidation of fusion low consumption, floodlight ‘power’ able to connection to ‘wafis’ dust filtering system , whose start is automatic with the sand-blasting Cm:41x37x35 ..

Bailo Sand Blaster S-06604

Bailo Sand Blaster ,S-06604Economic, adapted to the removal of investment and oxidations of fusion low consumptions, floodlight ‘power’ able to connection to ‘wafis’ dust filtering system , whose start is automatic with the sand-blasting..

Bailo- Red Valcunizer

Bailo- Red ValcunizerThe solid steel channel frame not only ensures this machine will withstand years of hard use but also guides the plattens for close alignment when closing. This feature combined with the large diameter pressing screw and large heating elements enables the even vulcanizatio..

BELL JAR FOR KAYA CAST MACHINE

BELL JAR FOR KAYA CAST MACHINE For use on vacuum investing machines. Made of clear,extra thick plexiglass...

BLUE BLOCK FERRIS WAX

FERRIS WAX BLUE BLOCK A carvable blue wax block for the most detailed lost wax castings. Ideal for rings, cuff links, pendants, medallions and more. File-A-Wax is easily sawed, carved, drilled or milled and can even be turned on a lathe. Burns out cleanly from moulds...

Boro- Nitride Spray

Boro- Nitride Spray A high temperature barrier coating and release agent that can withstand temperatures up to 2600° F. In rubber mold centrifugal casting, it is sprayed onto silicone rubber (about once every ten pours) into which zinc alloys are cast to increase mold life. Investment casters ..

BOTTOM INSULATION FOR MU200 CRUCIBLE

Crucible bottom insulation MU200, 70x25mm, hole 7 mm..

BOTTOM INSULATION FOR VC-400 CRUCIBLE

Crucible bottom insulation VC400 up to 1300°, quality Q=8700..

BOTTOM INSULATION FOR VC-650V CRUCIBLE

Crucible bottom insulation VC650VCrucible bottom insulation Ø78mm up to 1300°C, h=25, VC200,300,500,650V, quality Q=8700..

CA-951/2-Wax Pellets Green

CA-951/2-Wax Pellets Green Green Wax Pellets for Matt Gun. Wax pellets load directly into the Matt Gun. Use Green pellets for creating models on water...

CA2773-Matt Wax Slice-Blue

CA2773-Matt Carving Wax Slice-Blue Set A – 6 pieces. Large, flat, very smooth blue wax tablets provides the jewelry designer and model maker with an exceptional wax surface to create on. Blue wax is flexible and easily bent to shapes. Set contains 6 wax tablets: 3 tablets (4.5mm Thick), 1 tab..

CA2775-Matt Wax Slice-Green

CA2775-Matt Carving Wax Slice-Green Set A – 6 pieces. Large, flat, very smooth green wax tablets provides the jewelry designer and model maker with an exceptional wax surface to create on. Green wax is rigid, useful for milling. Set contains 6 wax tablets: 3 tablets (4.5mm Thick), 1 tablet (6..

CA2803-E Matt Mini-Lathe With Gauge

CA2803-E Matt Mini-Lathe With Gauge(30mm Motor Bracket) A hand-held versatile lathe that assembles directly onto a #30 handpiece and is powered by the flexible shaft machine. Use for all types of turning and milling of hard wax rods. Produce bands, bezels, florals, settings, chess pieces. ..

CA2853-Round Setting Matt Templates

CA2853-Round Setting Matt Templates Template – Pear & Oval Prong Settings. Made of unbreakable, heavy gauge, light green plastic, these templates help minimize the difficult time-consuming process of drawing designs on wax. Clearly calibrated in metric and carat equivalents. Sold individua..

CA2854-Matt Template Setting

CA2854-Matt Template-Oval,Pear,Marquise Setting Template – Round Prong Settings. Made of unbreakable, heavy gauge, light green plastic, these templates help minimize the difficult time-consuming process of drawing designs on wax. Clearly calibrated in metric and carat equivalents. Sold individ..

CA2855 Matt Template- Ring Template#1

CA2855 Matt Template- Ring Template#1Eliminates drawing ring outlines on wax models with rulers and dividers. Template is made of durable plastic with precision milled cut-out shapes of 18 ladies and gents rings. Includes instructions and 2 carving wax samples...

CA2880-Matt Trimmer

CA2880-Matt Trimmer(25mm Motor Bracket) Adjustable trimmer at various working angles with 90 ° locking plane to keep the proportions constant with mounting bracket and platform that can be connected to a handle with a maximum diameter of 25 mm..

CA2897-Green Matt Wax For Bracelet

CA2897-Green Matt Carving Wax For Bracelet Bracelet Blank. Grooved, half bangle green wax form. Enough wax to create round, square or oval bangles. Formulated for professional carvers with special compounds to avoid contamination, flaws or porosity. Can be carved, sawed, filed, machined or tur..

CA2899-Blue Matt Wax For Bracelet

CA2899-Blue Matt Carving Wax For Bracelet This 6" long arch-shaped block of carving wax is designed to simplify the construction of bracelets. From one blank style you can create round, oval, or square bracelets in a variety of sizes. Simply cut two slices of the desired thickness to form the ..

CA5102-Stone Shapes Matt Templates#1

CA5102-Stone Shapes Matt Templates#1 Template #1 – Stones. Made of unbreakable, heavy gauge, light green plastic, these templates help minimize the difficult time-consuming process of drawing designs on wax. Clearly calibrated in metric and carat equivalents. Sold individually..

CA5103-Signet Ring Matt Templates#2

CA5103-Signet Ring Matt Templates#2 Template #2 – Signet Ring. Made of unbreakable, heavy gauge, light green plastic, these templates help minimize the difficult time-consuming process of drawing designs on wax. Clearly calibrated in metric and carat equivalents. Sold individually...

CA5104-Ballerina Ring Matt Templates#3

CA5104-Ballerina Rings Matt Templates For Jewellery Design#3 Template #3-Ballerina Ring. Made of unbreakable, heavy gauge, light green plastic, these templates help minimize the difficult time-consuming process of drawing designs on wax. Clearly calibrated in metric and carat equivalents. Sold..

CA5105- Fancy Ring Matt Templates#4

CA5105-Fancy Ring Matt Templates For Jewellery Design#4Template #4 – Fancy Ring. Made of unbreakable, heavy gauge, light green plastic, these templates help minimize the difficult time-consuming process of drawing designs on wax. Clearly calibrated in metric and carat equivalents. Sold individ..

CA5106-Side View Matt Templates#5

CA5106-Side View Templates For Jewellery Design#5 Template #5 – Ring-Side View. Made of unbreakable, heavy gauge, light green plastic, these templates help minimize the difficult time-consuming process of drawing designs on wax. Clearly calibrated in metric and carat equivalents. Sold individu..

CA951/1-Wax Pellets Blue

CA951/1-Wax Pellets BlueBlue Wax Pellets for Matt Gun. Wax pellets load directly into the Matt Gun. Use Blue pellets for designing on a mandrel...

CA951/5-Wax Pellets Red

CA951/5-Wax Pellets Red Red Wax Pellets for Matt Gun. Wax pellets load directly into the Matt Gun. Use Red pellets for producing flexible threads for weaving...

CA955-E Matt Gun Kit Euro

CA955-E Matt Gun Kit Euro Extrudes wax wire shapes with different profiles and working characteristics for creating jewelry models. Gun controls the temperature and pressure of the extrusion process. Three different wax pellets for 3 different methods of design. Blue pellets — for designing on..

Castaldo Mould Spray

Castaldo Mould SprayCastaldo mold release spray is pure silicone oil in an aerosol can for use in releasing wax patterns from rubber or metal molds. Safe, non-toxic, colorless, odorless, greaseless. Will not damage molds made of natural mold rubber. Contains no CFCs or VOCs. 12 ounce can..

Castaldo Quick-Sil,Two Part RTV Molding Putty

Castaldo Quick-Sil Castaldo Quick-Sil is a two-part room temperature vulcanizing (RTV) silicone-molding putty that produces tough, strong, long-lasting production jewelry molds for lost wax casting with 0% shrinkage. Castaldo Quick-Sil is safe, non-hazardous and non-toxic and does not produ..

CASTALDO SPRAY

CTS1Castaldo Jewelry Mold Release Spray is pure silicone oil in an aerosol can for use in releasing wax patterns from rubber or metal molds. Castaldo Jewelry Mold Release Spray is safe, non-toxic, colorless, odorless, greaseless and long lasting. It contains no CFCs, no VOCs (volatile organ..

CB-611 SPRUE BASE HOLDER

CB-611 SPRUE BASE HOLDER Very convenient for fast tree assembly. May be adjusted to any convenient angle. Suitable for sprue bases from 3"-5"...

Cimo

Cimo Investment Mixture St.Louis 92-2KG

Cimo Investment Mixture St.Louis 92-2KG Common Process for Investment Mixture It works one single flask for investment preparation process.2 kg max dry powder capacity.Max flask size accepted: up to diam 120 mm. By 160 mm. H.Supplied without vacuum pump. Des..

CRUCIBLE FIBER COVER TF1200 WITH HANDLE

1193008 Crucible cover fiber with handle TF1200,up to 1200?C, Q=8703,..

Crucible shield (VC500-600, CC400)

Crucible shield for 78mm crucible, up to 1300°, VC500-600, CC400, Q=8700..

Crucible Shield for 110MM

Crucible Shield for 110MM Crucible,Crucible,up to 1300?(V)CC400 LCD,VC650V,Q=8700..

CRUCIBLE SHIELD FOR TF1200 up to 1300

11093010 Crucible Shield for TF1200 up to 1300?Crucible shield TF1200 up to 1300°, l=275mm, Q=8700,..

Crucible shield for VC400-480V

Crucible shield for VC400-480VCrucible shield for VC400-480V and crucible Øo=68mm up to 1300°C, quality Q=8700..

CRUCIBLE SHIELD RING TF1200

Crucible shield ring TF1200, hardened Q=8701..

CRUCIBLE SHIELD Øo=108 VC600

Crucible shield Øo=108 Øi=90 L=145,For VC600  88MM..

CRUCIBLE TONG MU-400

Crucible tongs MU400, MU700 PM-105..

CRUCILBE BOTTOM INSULATION TF1200

Crucible bottom insulation TF1200 up to 1300 °C..

Cylinder Cover 3.5x5

3.5x5 Cylinder Cover Steel flasks are used to make the mold in. The size is picked on the model size and casting method. Perforated flasks are for vacuum casting...

Cylinder Cover 3.5x7

3.5x7 Cylinder Cover Steel flasks are used to make the mold in. The size is picked on the model size and casting method. Perforated flasks are for vacuum casting...

Cylinder Cover 3.5x8

3.5x8 Cylinder CoverSteel flasks are used to make the mold in. The size is picked on the model size and casting method. Perforated flasks are for vacuum casting...

Cylinder Cover 3x6

3x6 Cylinder Cover..

Cylinder Cover 3x7

3x7 Cylinder Cover Steel flasks are used to make the mold in. The size is picked on the model size and casting method. Perforated flasks are for vacuum casting...

Cylinder Cover 3x8

3x8 Cylinder CoverSteel flasks are used to make the mold in. The size is picked on the model size and casting method. Perforated flasks are for vacuum casting...

Cylinder Cover 4.5X6

4.5X6 CYLINDER COVER Steel flasks are used to make the mold in. The size is picked on the model size and casting method. Perforated flasks are for vacuum casting...

Cylinder Cover 4.5x7

4.5x7 Cylinder Cover Steel flasks are used to make the mold in. The size is picked on the model size and casting method.Perforated flasks are for vacuum casting...

Cylinder Cover 4X6

4X6 CYLINDER COVER Steel flasks are used to make the mold in. The size is picked on the model size and casting method. Perforated flasks are for vacuum casting...

Cylinder Cover 4x7

4x7 Cylinder Cover Steel flasks are used to make the mold in. The size is picked on the model size and casting method. Perforated flasks are for vacuum casting...

Cylinder Cover 4x8

4x8 Cylinder CoverSteel flasks are used to make the mold in. The size is picked on the model size and casting method. Perforated flasks are for vacuum casting...

Cylinder With Flange 3.5x4

3.5x4 Cylinder With Flange Heavy-duty stainless steel perforated flasks for vacuum chamber casting.  With flange to fit and other vacuum casting machines. vacuum casting unit Metal: Aluminium Type: With Flange Size: 3.5 x 4..

Cylinder With Flange 3.5x5

3.5x5 Cylinder With Flange Heavy-duty stainless steel perforated flasks for vacuum chamber casting.  With flange to fit and other vacuum casting machines. vacuum casting unit Metal: Aluminium Type: With Flange Size: 3.5 x 5..

Cylinder With Flange 3.5x6

3.5x6 cylinder With Flange Heavy-duty stainless steel perforated flasks for vacuum chamber casting.  With flange to fit and other vacuum casting machines. vacuum casting unit Metal: Aluminium Type: With Flange Size: 3.5 x 6..

Cylinder With Flange 3.5x7

3.5x7 cylinder With Flange Heavy-duty stainless steel perforated flasks for vacuum chamber casting.  With flange to fit and other vacuum casting machines. vacuum casting unit Metal: Aluminium Type: With Flange Size: 3.5 x 7..

Cylinder With Flange 3.5x8

3.5x8 cylinder With Flange Heavy-duty stainless steel perforated flasks for vacuum chamber casting.  With flange to fit and other vacuum casting machines. vacuum casting unit Metal: Aluminium Type: With Flange Size: 3.5 x 8..

Cylinder With Flange 3x4

3x4 Cylinder With Flange Heavy-duty stainless steel perforated flasks for vacuum chamber casting.  With flange to fit and other vacuum casting machines. vacuum casting unit Metal: Aluminium Type: With Flange Size: 3 x 4..

Cylinder With Flange 3x5

3x5 Cylinder With Flange Heavy-duty stainless steel perforated flasks for vacuum chamber casting.  With flange to fit and other vacuum casting machines. vacuum casting unit Metal: Aluminium Type: With Flange Size: 3 x 5..

Cylinder With Flange 3x6

3x6 Cylinder With Flange Heavy-duty stainless steel perforated flasks for vacuum chamber casting.  With flange to fit and other vacuum casting machines. vacuum casting unit Metal: Aluminium Type: With Flange Size: 3 x 6..

Cylinder With Flange 3x7

3x7 Cylinder With Flange Heavy-duty stainless steel perforated flasks for vacuum chamber casting.  With flange to fit and other vacuum casting machines. vacuum casting unit Metal: Aluminium Type: With Flange Size: 3 x 7..

Cylinder With Flange 3x8

3x8 Cylinder With Flange Heavy-duty stainless steel perforated flasks for vacuum chamber casting.  With flange to fit and other vacuum casting machines. vacuum casting unit Metal: Aluminium Type: With Flange Size: 3 x 8..

Cylinder With Flange 3x8.5

3x8.5 Cylinder With Flange Heavy-duty stainless steel perforated flasks for vacuum chamber casting.  With flange to fit and other vacuum casting machines. vacuum casting unit Metal: Aluminium Type: With Flange Size: 3 x 8.5..

Cylinder With Flange 4.5x5

4.5x5 cylinder With Flange Heavy-duty stainless steel perforated flasks for vacuum chamber casting.  With flange to fit and other vacuum casting machines. vacuum casting unit Metal: Aluminium Type: With Flange Size: 4.5 x 5..

Cylinder With Flange 4.5x6

4.5x6 cylinder With Flange Heavy-duty stainless steel perforated flasks for vacuum chamber casting.  With flange to fit and other vacuum casting machines. vacuum casting unit Metal: Aluminium Type: With Flange Size: 4.5 x 6..

Cylinder With Flange 4.5x7

4.5x7 cylinder With Flange Heavy-duty stainless steel perforated flasks for vacuum chamber casting.  With flange to fit and other vacuum casting machines. vacuum casting unit Metal: Aluminium Type: With Flange Size: 4.5 x 7..

Cylinder With Flange 4.5x8

4.5x8 cylinder With Flange Heavy-duty stainless steel perforated flasks for vacuum chamber casting.  With flange to fit and other vacuum casting machines. vacuum casting unit Metal: Aluminium Type: With Flange Size: 4.5 x 8..

Cylinder with flange 4X4

4X4 cylinder with flange Heavy-duty stainless steel perforated flasks for vacuum chamber casting.  With flange to fit and other vacuum casting machines. vacuum casting unit Metal: Aluminium Type: With Flange Size: 4 x 4..

Cylinder With Flange 4x5

4x5 cylinder With Flange Heavy-duty stainless steel perforated flasks for vacuum chamber casting.  With flange to fit and other vacuum casting machines. vacuum casting unit Metal: Aluminium Type: With Flange Size: 4 x 5..

Cylinder With Flange 4x6

4x6 cylinder With Flange Heavy-duty stainless steel perforated flasks for vacuum chamber casting.  With flange to fit and other vacuum casting machines. vacuum casting unit Metal: Aluminium Type: With Flange Size: 4 x 6..

Cylinder With Flange 4x7

4x7 cylinder With Flange Heavy-duty stainless steel perforated flasks for vacuum chamber casting.  With flange to fit and other vacuum casting machines. vacuum casting unit Metal: Aluminium Type: With Flange Size: 4 x 7..

Cylinder With Flange 4x8

4x8 cylinder With Flange Heavy-duty stainless steel perforated flasks for vacuum chamber casting.  With flange to fit and other vacuum casting machines. vacuum casting unit Metal: Aluminium Type: With Flange Size: 4 x 8..

Cylinder with flange 4x9

4x9 Cylinder with flange Heavy-duty stainless steel perforated flasks for vacuum chamber casting.  With flange to fit and other vacuum casting machines. vacuum casting unit Metal: Aluminium Type: With Flange Size: 4 x 9..

Cylinder With Flange 5x5

5x5 Cylinder With Flange Heavy-duty stainless steel perforated flasks for vacuum chamber casting.  With flange to fit and other vacuum casting machines. vacuum casting unit Metal: Aluminium Type: With Flange Size: 5 x 5..

Cylinder With Flange 5x6

5x6 cylinder With Flange Heavy-duty stainless steel perforated flasks for vacuum chamber casting.  With flange to fit and other vacuum casting machines. vacuum casting unit Metal: Aluminium Type: With Flange Size: 5 x 6..

Cylinder With Flange 5x7

5x7 Cylinder With Flange Heavy-duty stainless steel perforated flasks for vacuum chamber casting.  With flange to fit and other vacuum casting machines. vacuum casting unit Metal: Aluminium Type: With Flange Size: 5 x 7..

Cylinder With Flange 5x8

5x8 Cylinder With Flange Heavy-duty stainless steel perforated flasks for vacuum chamber casting.  With flange to fit and other vacuum casting machines. vacuum casting unit Metal: Aluminium Type: With Flange Size: 5 x 8..

Cylinder With Flange 5x9

5x9 Cylinder With Flange Heavy-duty stainless steel perforated flasks for vacuum chamber casting.  With flange to fit and other vacuum casting machines. vacuum casting unit Metal: Aluminium Type: With Flange Size: 5 x 9..

Cylinder Without Flange 3.5X4

3.5X4 Cylinder Without Flange Heavy-duty stainless steel perforated flasks for vacuum chamber casting. Vacuum casting unit Metal: Aluminum Type: Without Flange Size: 3.5 x 4..

Cylinder Without Flange 3.5x5

3.5x5 Cylinder Without Flange Heavy-duty stainless steel perforated flasks for vacuum chamber casting. Vacuum casting unit Metal: Aluminum Type: Without Flange Size: 3.5 x 5..

Cylinder Without Flange 3.5x6

3.5x6 Cylinder Without Flange Heavy-duty stainless steel perforated flasks for vacuum chamber casting. Vacuum casting unit Metal: Aluminum Type: Without Flange Size: 3.5 x 6..

Cylinder Without Flange 3.5x7

3.5x7 Cylinder Without Flange Heavy-duty stainless steel perforated flasks for vacuum chamber casting. Vacuum casting unit Metal: Aluminum Type: Without Flange Size: 3.5 x 7..

Cylinder Without Flange 3.5x8

3.5x8 Cylinder Without Flange Heavy-duty stainless steel perforated flasks for vacuum chamber casting. Vacuum casting unit Metal: Aluminum Type: Without Flange Size: 3.5 x 8..

Cylinder Without Flange 3x4

3x4 Cylinder Without Flange Heavy-duty stainless steel perforated flasks for vacuum chamber casting.  With flange to fit and other vacuum casting machines. vacuum casting unit Metal: Aluminum Type: Without Flange Size: 3 x 4..

Cylinder Without Flange 3x5

3x5 Cylinder Without Flange Heavy-duty stainless steel perforated flasks for vacuum chamber casting. Vacuum casting unit Metal: Aluminum Type: Without Flange Size: 3 x 5..

Cylinder Without Flange 3x6

3x6 Cylinder Without Flange Heavy-duty stainless steel perforated flasks for vacuum chamber casting. Vacuum casting unit Metal: Aluminum Type: Without Flange Size: 3 x 6..

Cylinder Without Flange 3x7

3x7 Cylinder Without Flange Heavy-duty stainless steel perforated flasks for vacuum chamber casting. Vacuum casting unit Metal: Aluminum Type: Without Flange Size: 3 x 7..

Cylinder Without Flange 3x8

3x8 Cylinder Without Flange Heavy-duty stainless steel perforated flasks for vacuum chamber casting. Vacuum casting unit Metal: Aluminum Type: Without Flange Size: 3 x 8..

Cylinder Without Flange 4.5x5

4.5x5 cylinder Without Flange Heavy-duty stainless steel perforated flasks for vacuum chamber casting. Vacuum casting unit Metal: Aluminum Type: Without Flange Size: 4.5 x 5..

Cylinder Without Flange 4.5x6

4.5x6 cylinder Without Flange Heavy-duty stainless steel perforated flasks for vacuum chamber casting. Vacuum casting unit Metal: Aluminum Type: Without Flange Size: 4.5 x 6..

Cylinder Without Flange 4.5x7

4.5x7 cylinder Without Flange Heavy-duty stainless steel perforated flasks for vacuum chamber casting. Vacuum casting unit Metal: Aluminum Type: Without Flange Size: 4.5 x 7..

Cylinder Without Flange 4.5x8

4.5x8 cylinder Without Flange Heavy-duty stainless steel perforated flasks for vacuum chamber casting. Vacuum casting unit Metal: Aluminum Type: Without Flange Size: 4.5 x 8..

Cylinder Without Flange 4X4

4X4 Cylinder Without Flange Heavy-duty stainless steel perforated flasks for vacuum chamber casting. Vacuum casting unit Metal: Aluminum Type: Without Flange Size: 4 x 4..

Cylinder Without Flange 4x5

4x5 cylinder Without Flange Heavy-duty stainless steel perforated flasks for vacuum chamber casting. Vacuum casting unit Metal: Aluminum Type: Without Flange Size: 4 x 5..

Cylinder Without Flange 4x6

4x6 Cylinder Without Flange Heavy-duty stainless steel perforated flasks for vacuum chamber casting. Vacuum casting unit Metal: Aluminum Type: Without Flange Size: 4 x 6..

Cylinder Without Flange 4x7

4x7 Cylinder Without Flange Heavy-duty stainless steel perforated flasks for vacuum chamber casting. Vacuum casting unit Metal: Aluminum Type: Without Flange Size: 4 x 7..

Cylinder Without Flange 4x8

4x8 cylinder Without Flange Heavy-duty stainless steel perforated flasks for vacuum chamber casting. Vacuum casting unit Metal: Aluminum Type: Without Flange Size: 4 x 8..

Cylinder Without Flange 4X9

4X9 Cylinder Without Flange Heavy-duty stainless steel perforated flasks for vacuum chamber casting. Vacuum casting unit Metal: Aluminum Type: Without Flange Size: 4 x 9..

Cylinder Without Flange 5x5

5x5 cylinder Without Flange Heavy-duty stainless steel perforated flasks for vacuum chamber casting. Vacuum casting unit Metal: Aluminum Type: Without Flange Size: 5 x 5..

Cylinder Without Flange 5x6

5x6 Cylinder Without Flange Heavy-duty stainless steel perforated flasks for vacuum chamber casting. Vacuum casting unit Metal: Aluminum Type: Without Flange Size: 5 x 6..

Cylinder Without Flange 5x7

5x7 Cylinder Without Flange Heavy-duty stainless steel perforated flasks for vacuum chamber casting. Vacuum casting unit Metal: Aluminum Type: Without Flange Size: 5 x 7..

Cylinder Without Flange 5x8

5x8 cylinder Without Flange Heavy-duty stainless steel perforated flasks for vacuum chamber casting. Vacuum casting unit Metal: Aluminum Type: Without Flange Size: 5 x 8..

Cylinder Without Flange 5X9

5X9 Cylinder Without Flange Heavy-duty stainless steel perforated flasks for vacuum chamber casting. Vacuum casting unit Metal: Aluminum Type: Without Flange Size: 5 x 9..

Cylinder Without Flange Plain 2.5X3

Cylinder Without Flange Plain 2.5X3 Heavy-duty stainless steel perforated flasks for vacuum chamber casting. Vacuum casting unit Metal: Aluminum Type: Without Flange Plain Size: 2.3 x 3..

Cylinder Without Flange Plain 3.5X3.5

3.5X3.5 Cylinder Without Flange Plain Heavy-duty stainless steel perforated flasks for vacuum chamber casting. Vacuum casting unit Metal: Aluminum Type: Without Flange Plain Size: 3.5 x 3.5..

Cylinder Without Flange Plain 3.5X4

3.5X4 Cylinder Without Flange Plain Heavy-duty stainless steel perforated flasks for vacuum chamber casting. Vacuum casting unit Metal: Aluminum Type: Without Flange Plain Size: 3.5 x 4..

Cylinder Without Flange Plain 3.5X5

3.5X5 Cylinder Without Flange Plain Heavy-duty stainless steel perforated flasks for vacuum chamber casting. Vacuum casting unit Metal: Aluminum Type: Without Flange Plain Size: 3.5 x 5..

Cylinder Without Flange Plain 3.5X6

3.5X6 Cylinder Without Flange Plain Heavy-duty stainless steel perforated flasks for vacuum chamber casting. Vacuum casting unit Metal: Aluminum Type: Without Flange Plain Size: 3.5 x 6..

Cylinder Without Flange Plain 3X3

3X3 Cylinder Without Flange Plain Heavy-duty stainless steel perforated flasks for vacuum chamber casting. Vacuum casting unit Metal: Aluminum Type: Without Flange Plain Size: 3 x 3..

Cylinder Without Flange Plain 3X4.5

3X4.5 Cylinder Without Flange Plain Heavy-duty stainless steel perforated flasks for vacuum chamber casting. Vacuum casting unit Metal: Aluminum Type: Without Flange Plain Size: 3 x 4.5..

Cylinder Without Flange Plain 3X5

3X5 Cylinder Without Flange Plain Heavy-duty stainless steel perforated flasks for vacuum chamber casting. Vacuum casting unit Metal: Aluminum Type: Without Flange Plain Size: 3 x 5..

Cylinder Without Flange Plain 4.5x3

4.5X3 Cylinder Without Flange Plain Heavy-duty stainless steel perforated flasks for vacuum chamber casting. Vacuum casting unit Metal: Aluminum Type: Without Flange Plain Size: 4.5 x 3..

Cylinder Without Flange Plain 4X3.5

4X3.5 Cylinder Without Flange Plain Heavy-duty stainless steel perforated flasks for vacuum chamber casting. Vacuum casting unit Metal: Aluminum Type: Without Flange Plain Size: 4 x 3.5..

Cylinder Without Flange Plain 4X6

4X6 Cylinder Without Flange Plain Heavy-duty stainless steel perforated flasks for vacuum chamber casting. Vacuum casting unit Metal: Aluminum Type: Without Flange Plain Size: 4 x 6..

Cylinder Without Flange Plain 4X8

4X8 Cylinder Without Flange Plain Heavy-duty stainless steel perforated flasks for vacuum chamber casting. Vacuum casting unit Metal: Aluminum Type: Without Flange Plain Size: 4 x 8..

Cylinder Without Flange Plain 4X9

4X9 Cylinder Without Flange Plain Heavy-duty stainless steel perforated flasks for vacuum chamber casting. Vacuum casting unit Metal: Aluminum Type: Without Flange Plain Size: 4 x 9..

Cylinder Without Flange Plain 5X8

5X8 Cylinder Without Flange Plain Heavy-duty stainless steel perforated flasks for vacuum chamber casting. Vacuum casting unit Metal: Aluminum Type: Without Flange Plain Size: 5 x 8..

DIE FOR SHEET 12MM

Die For Sheet Approx 12MM 90x65x20MM..

DIE FOR SHEET 5X40MM

Die H90*65*20mm, for Sheet Approx 5*40mmDie H90*65*20 mm, for sheet approx. 5*40 mm,  isostatic quality Q=1000 radius 1..

DIE H175*120*30MM

10225301 Die H175*120*30mm die h175*120*30 mm, for sheet approx. 8*60 mm, isostatic quality Q=1000 radius=1 made..

DIE INSULATION FOR CRUCIBLE 110MM

Die insulation for crucible 110MMDie insulation for crucible 110MM and die 75x20MM,(V)CC400 LCD,Quality Q=8700..

DIE INSULATION FOR RECTANGULAR 65X20MM

Die Insulation For Rectangular DieDie insulation for rectangular die (V)CC400 65x20mm, Da=98 H=50, quality Q=8700..

DIE SHEET 10X60MM

10221455 Die h90*75*20 mm, for sheet 10*60 mmDie h90*75*20 mm, for sheet approx. 10*60 mm, isostatic quality Q=1000 radius=1..

DRAWING ROLL FOR WIRE/TUBE/SHEET

Drawing roll for wire/tube/sheet 04-06 mm ?=65mm, l=28mm, (V)CC400, Q=9070..

DRAWING ROLLER FOR 07-09MM

Drawing roller for 07-09mmDrawing roller for 07-09mm, Ø=62mm l=110mm for (V)CC1000/CC3000, Q=9070..

DRB-4 ROUND BLUE BAR FERRIS WAX

DRB-4 ROUND BLUE BAR FERRIS WAXRound Bracelet Blank (DRB-4). Ideal for lathe turning. Solid, blue wax round rod. Blue wax is most flexible with regular hardness. Will bend 90° on 1/8″ thickness. 2 5/8″ Diameter. 5 1/2″ Length. 1 Blue Round Rod per pack...

DRB-4 ROUND GREEN BAR FERRIS WAX

DRB-4 ROUND GREEN BAR FERRIS WAX Round Bracelet Blank (DRB-4). Ideal for lathe turning. Solid, green wax round rod. Green wax is hard with no flexibility. Can be filed and machined. Good for fine detail work. 2 5/8″ Diameter. 5 1/2″ Length. 1 Green Round Rod per pack...

DRB-4 ROUND PURPLE BAR FERRIS WAX

DRB-4 ROUND PURPLE BAR FERRIS WAX Carving Wax is a Ferris Brand, File-A-Wax Rod, wax may be hand carved as well as machined. This carving wax round bar is formulated to the demanding specifications of professional Model Wax Carvers. The Purple is a Medium Grade carving ..

ECONOSIC SILICON CASTALDO

ECO111 ECONOSIC SILICON CASTALDO Castaldo No Shrink Pink Strips Mold Rubber contains pure natural gum rubber, making it softer and more pliable. This Castaldo Strip has absolutely no shrinkage, and high adherence to detail and memory. Experienced mold-makes know this rubber has superior quali..

Eishin Auto Clamp Height Adjuster

Eishin Auto Clamp Height AdjusterIt is easy to change the height...

Eishin Digital Wax Injector

Digital Wax Injector (Eishin) CHARACTERISTICSHigh Filling Ability filling ability is very high since wax is injected after the inside of a rubber mold is vacuumized. A wax pattern with high filling ability is provided for both thin and small materials.Setting of Small Time Unit Setting..

Eishin Small Auto Clamp

Eishin Small Auto Clamp Improvement of Productivity through the Memory Function 10 combinations of set values of parameters of the primary pressure for wax injection (Press 1), secondary pressure for wax injection (Press 2), secondary pressure start time (Time), mold clamping pressure (Cl..

FERRIS RING WAX T-1062E BLUE

T-1062E BLUE FERRIS RING WAX Ferris File-A-Wax Carving Waxes are used for making models to be reproduced by the lost wax casting process. These are the waxes preferred by master carvers for years and years. Ideal for rings, cuff links, pendants, medallions and much more. Easily sawed, carved,..

FERRIS RING WAX T-1062E GREEN

T-1062E GREEN FERRIS RING WAX Ferris File-A-Wax Carving Waxes are used for making models to be reproduced by the lost wax casting process. These are the waxes preferred by master carvers for years and years. Ideal for rings, cuff links, pendants, medallions and much more. Easily sawed, carved..

FERRIS RING WAX T-200 BLUE

T-200 BLUE FERRIS RING WAX Flat-Sided Tube (T-200). Pre-formed blue wax ring tube. May be either hand or machined shaped with files, burs or on a lathe. Blue wax is most flexible with regular hardness. Will bend 90° on 1/8″ thickness. 1 5/16″ Wide. 1 3/16″ High. 5/8″ Diameter Eccentric Hole. ..

FERRIS RING WAX T-200 GREEN

T-200 GREEN FERRIS RING WAX Flat-Sided Tube (T-200). Pre-formed green wax ring tube. May be either hand or machined shaped with files, burs or on a lathe. Green wax is hard with no flexibility. Can be filed and machined. Good for fine detail work. 1 5/16″ Wide. 1 3/16″ High. 5/8″ Diameter Ecc..

FERRIS RING WAX T-250 BLUE

T-250 BLUE FERRIS RING WAX Flat-Sided Tube (T-250). Pre-formed blue wax ring tube. May be either hand or machined shaped with files, burs or on a lathe. Blue wax is most flexible with regular hardness. Will bend 90° on 1/8″ thickness. 1 1/8″ Wide. 1 1/8″ High. 5/8″ Diameter Eccentric Hole. 6″..

FERRIS RING WAX T-250 GREEN

T-250 GREEN FERRIS WAX Flat-Sided Tube (T-250). Pre-formed green wax ring tube. May be either hand or machined shaped with files, burs or on a lathe. Green wax is hard with no flexibility. Can be filed and machined. Good for fine detail work. 1 1/8″ Wide. 1 1/8″ High. 5/8″ Diameter Eccentric ..

FERRIS SLICE WAX BLUE

FERRIS SLICE WAX BLUE A selection of thirteen carvable blue wax slices in various sizes, for the most detailed lost wax castings. Blue (regular) wax is highly flexible and can be used for creating extremely thin wall sections...

FERRIS SLICE WAX GREEN

FERRIS SLICE WAX GREEN A selection of thirteen carvable green wax slices in various sizes, for the most detailed lost wax castings. green (regular) wax is highly flexible and can be used for creating extremely thin wall sections...

FERRIS WAX T-1062 BLUE

T-1062 BLUE FERRIS WAX Round Tube (T-1062). Pre-formed blue wax ring tube. May be either hand or machined shaped with files, burs or on a lathe. Blue wax is most flexible with regular hardness. Will bend 90° on 1/8″ thickness. 1 1/16″ Diameter. 5/8″ Diameter Hole. 6″ Length...

FERRIS WAX T-1062 GREEN

T-1062 GREEN FERRIS WAX Round Tube (T-1062). Pre-formed green wax ring tube. May be either hand or machined shaped with files, burs or on a lathe. Green wax is hard with no flexibility. Can be filed and machined. Good for fine detail work. 1 1/16″ Diameter. 5/8″ Diameter Hole. 6″ Length...

FILLING CONE UPTO 1300°C

FILLING CONE UPTO 1300°Filling cone VC400-VC480V up to 1300°C, Øa=200 Øi=50 H=20, quality Q=8700..

FLASK GASKET GRAPHITE 169/110MM

Flask gasket for Ø=108mm, graphite, Ø=169/110mm..

FLASK GASKET RED SILICON

Flask gasket for flask Ø=100mm, red silicone , Ø=169/110mm..

G3D SYNERGY 22.7KG SACK

G3D SYNERGY 22.7KG SACKSynergy was developed by G3D in the United Kingdom - tried and tested by jewellery manufacturers worldwide. It is designed Primarily for investing, burnout and DIRECT CASTING of your resin/wax patterns.Synergy is an investment powder for CAD/CAM resin direct castingHighest Qua..

G3D SYNERGY 45KG DRUM

G3D SYNERGY 45KG DRUMSynergy was developed by G3D in the United Kingdom - tried and tested by jewellery manufacturers worldwide. It is designed Primarily for investing, burnout and DIRECT CASTING of your resin/wax patterns.Synergy is an investment powder for CAD/CAM resin direct castingHighest Quali..

GL102 GOLD LABLE WHITE ROLL CASTALDO

GL102 GOLD LABLE WHITE ROLL CASTALDOA high concentration of pure natural gum rubber makes Castaldo White firm but flexible. A good all-purpose mold rubber that cuts well. Well-suited for thin molds. Vulcanize at 310°F for 15 minutes per 1/4" of mold frame thickness. Rubber is 1/8" thick. S..

GL111 GOLD LABLE STRIP CASTALDO

GL111 GOLD LABLE STRIP CASTALDOContains more pure natural gum rubber than Castaldo White Label, making Castaldo Gold softer and more pliable. The superior qualities of Castaldo Gold make it the ideal rubber for difficult molds containing undercuts, filigree or multiple settings. Easy to pack a..

Glass wool inside MC100V, MC60

Glass wool inside MC100V, MC60 bottom part, 530x160mm 10mm thick..

GOLD LABLE YELLOW ROLL CASTALDO

GL101 GOLD LABLE YELLOW ROLL CASTALDO This is a soft, natural, pliable rubber. It has the ideal characteristics for difficult molds containing undercuts, filigree and settings. Rubber is 1/8″ thick and vulcanizes at 310°F – 15 minutes for 1/4″ mold frame thickness. 5 lb...

GRANULATING TANK O-RING

O-ring Ø165x7 mm7, granulating tank..

GRAPHITE BALL D=20 FOR CASTING ROD

Graphite BallGraphite ball D=20 for casting for rod 12mm, isostatic quality Q=2000,..

GRAPHITE GREASE (1KG)

Graphite Grease(Hydrokollag) 1kg bottle,..

GREEN BLOCK FERRIS WAX

FERRIS WAX GREEN BLOCK A selection of thirteen carvable green wax slices in various sizes, for the most detailed lost wax castings. Green (regular) wax is highly flexible and can be used for creating extremely thin wall sections...

Showing 1 to 250 of 409 (2 Pages)